SlipNOT® non slip Grip Plates® are available in a variety of thickness from 1/8" on up with widths of 4', 5' or 6' and lengths of 8', 10' and 12'. Safety non slip Grip Plates® can also be ordered cut or fabricated to sizes/shapes required. Surface grades for metal Grip Plates® are fine, medium and coarse. Tested and durable, SlipNOT® non slip Grip Plates® build safety into any new project. The steel SlipNOT® surface coating can also be applied to aluminum plates for a durable yet lightweight alternative. Also, SlipNOT® stainless steel surface can be applied to aluminum base materials for a lightweight, lower cost alternative to stainless steel on stainless steel.
SlipNOT® has designed state of the art safety ladder rungs for top quality construction. SlipNOT® rungs are available in 3/4" or 1" size for rounds or squares, either cut to size or in 10-12 ft stock lengths. Available in solid shapes or tubes, SlipNOT® ladder rungs can be welded directly into the sides of support stringers then painted or galvanized as needed. Safety ladder rungs exceed the OSHA standard 1926.1053 (a)(6)(i) and OSHA standard 1910.26 (a)(1)(v) for slip resistant ladder rungs.
SlipNOT® non-slip ladder rung covers are designed for the modernization of existing slippery rungs. Ladder rung covers are available in stock sized lengths of 10-12 ft. lengths or can be cut to specific lengths. Ladder rung covers are easily welded to existing ladder rungs creating an instantly safe surface. SlipNOT® ladder rung covers exceed the OSHA standard 1926.1053 (a)(6)(i) and OSHA standard 1910.26 (a)(1)(v) for slip resistant ladder rung covers.
Available in a variety of styles, types or bar sizes/spacing, SlipNOT® slip resistant Grip Grate® is ideal for wet or oily areas. SlipNOT®’s slip resistant Grip Grate® makes any grating meet OSHA’s standards. Grates that are covered with SlipNOT® all metal slip resistant surface coating have 100% surface coverage, which means any step is a safe step when it’s covered with SlipNOT®.
SlipNOT® slip resistant stair treads and covers are available in grating, plate, perforated plate and expanded metal. Treads are formed to specifications with nosings, risers and nosings or formed to a channel. SlipNOT® non-slip tread covers are easily retrofitted over existing grating or unsafe diamond checker plate assemblies. They can be welded directly to current treads or stringers or can be bolted in place. Holes can be provided pre-drilled or drilled and countersunk in the field without harming the SlipNOT® surface. For retrofitting over concrete steps, treads are routinely mounted into masonry anchors. SlipNOT® non-skid treads become an integral safety component for extreme wear longevity and continual safety. Covers are available in thickness of 1/8" up to 1/2" and standard depths are 8"-12". SlipNOT® stair treads exceed OSHA Standard 1910.24F for slip resistant stair treads.
SlipNOT® slip resistant stair nosings are available in a range of sizes and are made to meet your projects needs. SlipNOT® non slip stair nosings drastically improve the safety of existing stairs or new construction. Stair nosings can be added to grating for permanent, sure-footed safety and coverage. SlipNOT® safety stair nosings can be provided with countersunk holes or with anchors, such as J-hooks or Nelson studs, welded per your specifications. Like other SlipNOT® products these nosings are available to your specifications in various widths and lengths. SlipNOT® slip resistant products exceed the recommendations for slip resistance by ADA and OSHA. They are the one time answer for safety.
SlipNOT® Expanded Metal-Grid Grip® (3/4 No. 9 flattened expanded metal) is generally used to retrofit over existing dangerously slick gratings creating a safe, productive walking surface. Expanded Metal-Grid Grip® provides vital traction necessary to increase safety with a minimum of weight and surface area. SlipNOT® coated expanded metal can be purchased in stock sheets or cut to size and custom formed to cover stair treads or other project specific requirements. This product is available in steel, aluminum, galvanized steel or stainless steel. SlipNOT® Grid Grip® is durable and long lasting with a surface hardness between 55-63 on the Rockwell “C” Scale.
With a number of different hole sizes and styles available, SlipNOT® slip resistant perforated metal plates combine the flow through advantages of grating and the solid surface of plate. SlipNOT® manufactures slip resistant Flex Grip® that flexes when walked on to prevent worker fatigue. SlipNOT® slip resistant perforated plates exceed all slip resistant requirements set by OSHA and ADA. SlipNOT® perforated metal plate is available in steel, stainless steel, aluminum and galvanized steel.
Access hatch and vault covers for power communication, gas and water along with pull boxes are constructed from slip resistant SlipNOT® aluminum, stainless steel and galvanized plate, grating or a combination of both. SlipNOT® vault covers are cut to size and fabricated to fit the DOT's required meter and pull box frame. SlipNOT® non slip vault covers are approved and used by cities such as: Los Angeles, Seattle, New York, San Francisco, Portland and many more.
SlipNOT® slip resistant road plates provide maximum durability and insure compliance with state and municipal DOT minimum coefficient of friction standards, even after extensive use in the most demanding conditions. SlipNOT® slip resistant road plates have been subjected to years of study, both field and laboratory trials, and been proven effective in providing sure-traction surfaces even after years of wear. This proven performance minimizes liabilities by continuing to provide maximum slip-resistance without wearing smooth or flaking off like other temporary surface coatings. Motorcycle and Bicycle Federations across the nation support SlipNOT® road plates for their high traction and safety especially in wet and oily situations. SlipNOT®’s high bond strength and surface hardness withstand the rigorous demands of traffic environments insuring continuous safety and regulatory compliance years after short-term paint-on solutions have worn dangerously smooth. Companies such as Con Edison and Seattle City Lights use SlipNOT® metal safety flooring products.
SlipNOT® slip-resistant handrails provide extra traction on wet and slippery staircases. Available in Grade 1 and Grade 2, slip-resistant handrails help to keep workers on their feet. SlipNOT® handrails are available in steel, stainless steel, galvanized steel and aluminum, however are generally utilized in stainless steel. SlipNOT® slip-resistant handrail systems are a permanent way to ensure safety in dangerous situations, decreasing the chance of injury or even fatality. SlipNOT® handrail systems far exceed the OSHA and ADA standards.
SlipNOT® non-slip aluminum extruded planking is available punched or solid, provides strong lightweight flooring as an alternative to bar grating. In addition, SlipNOT® slip resistant planking and aluminum grating are an ideal alternative to fiberglass especially if toxic fumes and fireproof products are a concern.
SlipNOT® drain covers provide instant safety to slippery floors. Non-slip drain covers are available in stainless steel, steel, galvanized steel and aluminum. The covers can be made out of solid plate, perforated plate, grating, expanded metal or other specified material. SlipNOT® can either fabricate the drain cover to specifications or can coat existing metal drain covers. Drain covers remain slip resistant in all wet and oily conditions.
SlipNOT® manufactures slip resistant top plates for floor scales. Top plates provided by SlipNOT® can be custom fabricated to meet the specifications of the floor scale. SlipNOT® can also coat existing floor scale top plates that are already in use. Floor scales that include SlipNOT® non-slip top plates are much more slip resistant than those that utilize standard diamond plate or checker plate.
SlipNOT® Metal Safety Flooring products are extremely versatile and can be used in countless applications. Our products are not limited to the plate, grating, perforated plate, expanded metal, plank, ladder rungs/covers, stair treads, nosings, drain covers, vault covers and road plates that we routinely coat, but our high traction; slip resistant metal coating can be applied to any metal product.
